Sage
HomeAbout UsProductsContact UsLogin

Products


Warning: Undefined variable $V_CAT in /home4/encosies/public_html/include/products.php on line 191

CMD Series - Carbon Monoxide Monitor with Analog or BACnet/Modbus


CMD Series - Carbon Monoxide Monitor with Analog or BACnet/Modbus

Details

Wall or duct mount models
Setup/calibration fully menu driven
Selectable ranges of 0-100, 150, 300, 400 or 500 ppm
Replaceable Electrochemical sensing element
Optional on board relays with field adjustable trip point.
Optional BACnet or Modbus communications
Powered by either an AC or DC source
Choice of three field adjustable analog output signals
Easy to calibrate in the field

Categories: BACnet, Air & Gas, Carbon Monoxide / Nitrogen Dioxide


Description

The CMD5B4 & 5 Series carbon monoxide detector uses an electrochemical sensor to monitor the carbon monoxide level and outputs a field-selectable 4-20 mA , 0-5 or 0-10 Vdc. The sensing range and output may be scaled to either 100, 150, 300, 400 or 500 ppm via the on-board menu. A front panel LCD is standard to ensure easy setup and operation. It is available in either wall/surface or duct mount configurations. Other standard features include a back light for the LCD, a front panel test switch, status indication and an alarm buzzer. The test function may also be controlled remotely with a digital input signal. The on-board menu allows  local configuration of all device parameters.

Optional features include one or two alarm relays and/or RS-485 network communication configured for either ModBus or BACnet protocol.